Inicio columna 1

Pine Plywood

Pine Plywood

Plywood board manufactured totally with natural Pine wood veneer, joined by means of phenol glues. Depending on its use, the following grades are available:

  • C+/C CE4 : Both faces with knots and putty. Only one face sanded. Used for packaging.
  • CPC CE2+: One face repaired and knotty back face. Main use is for interior structures.
  • A/C+ : One clean face and knotty back face. Main use is for interior carpentry and construction equipment.
     

Formats

Dimensions:
2500 x 1250 mm
2440 x 1220 mm

Thicknesses:
09 mm  -  10 mm  -  12 mm  -  15 mm  -  18 mm
21 mm  -  24 mm  -  30 mm  -  40 mm
 

Packaging

Separating battens on the lower part. Everything joined and held together by straps.

The storage conditions for this product are: a dry, well ventilated place and protected from direct sunlight.
 

Fin columna 1
Inicio columna 2
Fin columna 2